Identificador: 1661
Abierta
ID de articulo : # 1131 se ha agregado a su lista de deseos.
ID de articulo : # 2604 se ha agregado a su lista de deseos.
Descripción
PARTE: 2JG-MAG-BIG800CE - SIERRA RADIAL - JUNIOR 800CE
Offer adaptability, versatility, precision and durability to shops of all sizes. Maggi has been producing radial arm saws since 1973 and over the years has continually improved technical design and quality. Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. European quality made to last!
- 4 HP, 2800 RPM motor
- 400 mm (15.75") Blade diameter capacity (Not included)
- 30 mm Arbor diameter
- 73.23" x 45.08" Table size
- 27.75" Max crosscut length on 3/4" thick material (90 deg)
- 0 to 40.5" Rip capacity
- 4.9" Max depth of cut
- 19.68" Max cut length at 45 deg on right side
- 12.20" Max cut length at 45 deg on left side
- Dust chute on blade guard as well as rear of table
- Machine weight: 495 Lbs.
- Machine dimensions: 73" x 62" x 61" T
- Voltage: 230V 3-Phase
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA - 1 LADO
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA
- 1 LADO
NUEVO CON GARANTIAOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The tw...
AMXmachinery1
ALIMENTADOR - REASERRADORA
PARTE: 2CK-AF19NIs designed to allow consistent and automated feeding of material through vertical bandsaw or resaws. Is pneumatically actuated by a switch in the fence so no foot pedal is required making for a simple and convenient operation. With 10 feed speeds to choose from you can dial in the optimum feed speed for your material. Intended to be fit on bandsaws which are over 24” but could be fitted on smaller bandsaw tables, but may require an extension off the side of your bandsaw ...
AMXmachinery1
PARTE: 2CK-HR11P - REASERRADORA HORIZONTAL - 1 BANDA - 20 HP – 11.8” ANCHO X 4.92” ESPESOR
PARTE:
2CK-HR11P - REASERRADORA HORIZONTAL - 1 BANDA - 20 HP – 11.8” ANCHO X 4.92”
ESPESOR
NUEVA CON GARANTIACan produce a cut up to 11.8” wide and 4.92” thick. Capable of handling material from 11.8” wide to 9.8” thick. The powerful 20HP motor makes easy work of even hard to cut wood material. The thin kerf 1” wide blade achieves optimum cut quality while maximizing material yield. Equipped with motorized thickness adjustment with digital control for convenient blade he...
-500x500.png)
AMXmachinery1
TORNO 16'' X 60''
TORNO 16'' X 60'' PARTE: 2GM-GML-1660HD16” x 60”, 2-1/16” bore, 6 HPISO 9001 certifiedLarge spindle bore 2-1/16”Heavy Duty spindle D1-6One-piece solid cast iron machine baseHeavy Duty guideway width 10-1/4”Heavy Duty main motor 6 HP16 spindle speeds from 45-1,800 rpm, speeds: 45/70/90/108/140/165/215/255/330/385/510/585/770/900/1170/1800rpm45 kinds of inch threads, and 39 kinds of metric threadsThreading and feeding rate change without ch...