PARTE: 4ST-MV 520 - CENTRO DE CORTE 5 EJESProductivity, precision, automation.Is designed for manufacturers of timber-framed houses and TRUSS trusseswho require speed, repeatability and digital integration.5-axis technology for complex cutsThe cutting unit rotates 360° and tilts ±90°, easily performing:- Straight cuts- Angled cuts- High-precision compound cutsPerfect for beams and structural components with variable geometries.Patented handling for maximum speedThe independent dual-belt clamp...

PARTE: 3HO-HDL-60D - LIJADORA DE MOLDURAS

PARTE: 3RE-23MH - MOLDURADORA ALTA VELOCIDADHigh-Speed processing of solid wood floors, wainscoting, four-side planning of finger-jointed materials, strips, shipboards,etc., with a maximum feeding speed of 80M/min.Characteristic1.The feeding speed is 8-80m/min, the feeding motor adopts a permanent magnet synchronous motor, and the feeding system adopts a high-speed reducer and a strong universal joint transmission. The feeding power is strong, and the feeding effect is smooth and powerful.2.The...

PARTE: 3RE-RMM640 - MOLDURADORA DE USO RUDOProfessional solution for heavy cutting of extra large wooden house beams and columns, and ultra-wide mouldings processing.Characteristic1.Special processing range, widely satisfy with the needs of greatness workpieces. The Max. working width is 400mm, and the Max. thickness is 300mm. 2. Each spindle with the diameter of 50mm. The out bearing on the horizontal spindles can increase the carrying capacity. The Max. outer diameter of cutting circle reach...

PARTE: 3RE-M23U - MOLDURADORA DE 4 LADOSProfessional solution: solid wood or MDF and HDF furniture, wooden door and so onCharacteristic1.Inverter feed speed of 6~30m/min2.Individual motor to each spindle to ensure maximum power transmission3.High precision spindle units with two pairs of high precision bearings each end of the assembly4.All main spindle adjustments are carried out from outside the enclosure5.Hard chromed bed plates to minimise bed wear6.Short piece driven top feed roller unit fo...

PARTE: 3RE- D60M - ESPIGADORA DOBLE Professional solution for volume producing two ends profile of panel furniture, door, solid wood floor, solid wood composite floor, PVC floor, MBF floor, wood-plastic composite with max thickness 85mm.Characteristic1. Each spindle can rotate , convenient to achieve angle-truncate , tenon, groove and etc2. Can hoggers on cut-off saw that can discharge waste material more helpfully3. Adopted widen by high precision linear orbit,  machine can run in precision ...

PARTE: 2LA-5000 - LIJADORA EN SERIECan be configured to sand the top, bottom or sides of parts utilizing a chain driven roller feed system. It has a fixed height roller conveyor.fully customizable to suit shop needsdesigned with a small footprintideal for sanding long thick partsruggeddependable

PARTE: 2LA-6000 - LIJADORA EN SERIEWill brush sand and/or wire brush parts with standard widths from 25 to 73 inches. It has 1 to 6 spindles which will accommodate sanding or wire brushes up to 14 inch diameter. It has a fixed height conveyor and accommodates parts up to 9 inches thick.fully customizable to suit shop needsdesigned with a small footprintideal for sanding long thick partsruggeddependable

PARTE: 2LA-150 - LIJADORA DE MOLDURASThis basic machine fills the need for a lower cost profile sander to sand raised panels, door edges and work pieces that do not require a tilting arbor. It features an inverter controlled 3 phase motor, variable speed, and vertical adjustment.lower cost profile sander

PARTE: 2PI-220 - LIJADORA DE CANTOSfeatures two counter-rotating spindles to be used with brush type sanding wheels. This allows parts to be sanded without noticeable rounding over on corners. The sanding technique is to sand the left corners on the right sander and the right corners on the left sander. This method has the brushes formed to the profile as they go over the corners.designed for flexible brushes2 upper and lower sanding headstable moves up and down, allowing the user to sand certa...

PARTE: 2LA-230 - LIJADORA DE MOLDURASIs a two spindle machine designed for use with flexible brush type sanding wheels. The spindles adjust individually, with vertical, horizontal, tilt and rotation. It can be placed at the outfeed end of a moulder, over a table, or used to sand free-hand.designed for flexible brushesfully adjustable individually, with vertical, horizontal, tilt, and rotation.

PARTE: 2LA-260 - LIJADORA DE MOLDURASIf you need to sand big or odd-shaped parts, sealer sanding or white wood sanding – this machine is for you! It features inverter-controlled variable speed spindles, and vertical adjustment.this machine can sand just about anything! not just wood and painted wood, metal too!designed for flexible brusheshandles odd-shaped parts and big parts

PARTE: 2LA-360 - LIJADORA DE CANTOSThe key to successful profile sanding is a combination of machine versatility, use of the correct abrasive medium, plus a little patience and understanding. The results are a remarkable increase in consistency, quality, and productivity.wheel tilts forward or backwardremovable fencequickly make fine adjustments

PARTE: 2LA-700 - LIJADORA DE CANTOSDesigned and manufactured for a variety of functions like destressing, polishing, denibbing, sealer sanding on wood, metal, and plastic. Sanding heads can be wire, abrasive nylon, or sanding brushes.eStop feature makes it easy for any employee to run this machine and it helps to prevent accidents.Side head sanding.Multiple top head sanding options: Anything from 2 top heads up to 4.Feeds Through Multiple Materials: wood, metal, and plasticVariable Speed Conveyo...

PARTE: 2LA-390 - PERFILADORA AUTOMATICAIs a different concept in shapers. It’s conveyor fed, making the 390 ideal for shaping small parts which could not be fed with a conventional power feeder.A versatile shaper, with its fast and easy changeover, makes it ideal for the shop with a large inventory of profiles.User friendly; able to adjust the VFD to control sanding wheel direction and speed.eStop prevents accidents.Multiple power options.

PARTE: 2PI-FNX -RANURADORA DE PISOSGreat for cabinet box/case makers who need speed when producing notched products.

PARTE: 2PI -TSS - SIERRA PARA CORTE, RECORTE Y RANURADOWas designed to cut materials that are susceptible to tear out as well as pack cutting of multiple parts at the same time.Tear-out FREE! Absolutely no tear-out on the cut boardsVery safe operation for the userMore accurate than a manual chop sawFrame is designed to sit flat or tilted at 10 degree angleTigerStop ready

PARTE; 2PI-HPMT - ESPIGADORA HORIZONTAL Has a working length of 48”. This machine has a full three axis CNC control. One spindle is used for the mortise work and a separate spindle is used for tenon work. Two working zones are used, allowing for left and right hand programs.Elimination of complicated machine setupProvide a stronger productEasy assembly by providing self aligning joints

PARTE: 2PI-MTH - ESPIGADORA HAUNCHINGIs a multi-function, multi-axis Horizontal Machining Center designed to machine many of the components of Kitchen Cabinets all in one machine.Efficiency – haunch, mortise, and tenon all on one machineSpeed – increased cabinet door production

PARTE: 2PI-HMJ - ESPIGADORA HAUNCHINGIs a jump haunch machine for beaded face frames.Simple and user friendly interface.Small footprint.Increased production by its ability to double up parts on one cut.Ease the assembly process by providing self aligning joints.