Explorar Anuncios

1893 listings found. Showing results 1 to 80

PARTE: 12552 - COMPRESOR DE TORNILLO - 30 HP – INGERSOLL RAND - 460V

PARTE: 12552 - COMPRESOR DE TORNILLO - 30 HP – INGERSOLL RAND - 460V USADO - MUY BIENAS CONDICIONESIngersoll Rand UP6S-30-125Used / Like New Ingersoll RandModel ...

AMXmachinery

PARTE: 12551 - COMPRESOR DE TORNILLO - 50 HP – INGERSOLL RAND 460V

PARTE: 12551 - COMPRESOR DE TORNILLO - 50 HP – INGERSOLL RAND 460V USADO - BUENAS CONDICIONESIngersoll Rand EPE50-PE-12550 HP, 3 Phase, 460V212 CFM26k Hours ...

AMXmachinery

PARTE: 12550 - TRITURADORA - ORILLAS CHAPA, PAPEL, CARTON, FOIL DE METALES FINOS - BLOAPCO - MODEL 5SC

PARTE: 12550 - TRITURADORA - ORILLAS CHAPA, PAPEL, CARTON, FOIL DE METALES FINOS - BLOAPCO - MODEL 5SCPara papel, cartón corrugado y fibras pesadasUSADA - MUY BUENAS CO...

AMXmachinery

PARTE: 12549 - BALER - COMPACTOR - VERTICAL - 36” X 20” - CARDBOARD CARTON - AMERICAN

PARTE: 12549 - BALER - COMPACTOR - VERTICAL - 36” X 20” - CARDBOARD CARTON - AMERICAN USED - GOOD CONDITIONS 3 HP, 220V, 1 PHASE MOTOR HYDRAULIC

AMXmachinery

PARTE: 12549 - EMBALADORA - VERTICAL - 36” X 20” - CARTON - AMERICAN

PARTE: 12549 - EMBALADORA - VERTICAL - 36” X 20” - CARTON - AMERICAN USADA - BUENAS CONDICIONES MOTOR 3 HP, 220V, 1 FASE HIDRAULICA

AMXmachinery

PARTE: 12548 - BALER - COMPACTOR - VERTICAL - 30” X 60” - CARDBOARD CARTON - 67” OPEN HEIGHT

PARTE: 12548 - BALER - COMPACTOR - VERTICAL - 30” X 60” - CARDBOARD CARTON - 67” OPEN HEIGHT10 HP MOTOR USED - GOOD CONDITIONS

AMXmachinery

PARTE: 12548 - EMBALADORA - VERTICAL - 30” X 60” - CARTON - 67” ALTURA ABERTURA

PARTE: 12548 - EMBALADORA - VERTICAL - 30” X 60” - CARTON - 67” ALTURA ABERTURA USADA - BUENAS CONDICIONES Motor 10 HP

AMXmachinery

PART: 12547 - WOOD CHIPPER - GRINDER - 58” - PRECISION

PART: 12547 - WOOD CHIPPER - GRINDER - 58” - PRECISION USED - GOOD CONDITIONPrecision 58" Chipper - Model 58-60-166 Knife 150 HP Motor

AMXmachinery

PARTE: 12547 - TRITURADOR - ASTILLADOR MADERA - 58” - PRECISION

PARTE: 12547 - TRITURADOR - ASTILLADOR MADERA - 58” - PRECISION USADO - BUENAS CONDICIONESPrecision 58" Chipper - Model 58-60-166 Knife 150 HP Motor

AMXmachinery

PART: 12546 - WOOD CHIPPER - GRINDER - 58” - PRECISION

PART: 12546 - WOOD CHIPPER - GRINDER - 58” - PRECISION USED - GOOD CONDITIONYear 2018Precision 58" Chip Pac6-Knives72" CycloneH-Type blower with dual...

AMXmachinery

PARTE: 12546 - TRITURADOR - ASTILLADOR MADERA - 58” - PRECISION

PARTE: 12546 - TRITURADOR - ASTILLADOR MADERA - 58” - PRECISIONUSADO - BUENAS CONDICIONESYear 2018Precision 58" Chip Pac6-Knives72" CycloneH-Type blower w...

AMXmachinery

PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUS

PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUSSpray Line, Dryer, Pumps and Guns and Infeed Table complete USED - VERY GOOD CONDITIONPassline Height: 900 mm Operati...

AMXmachinery

PARTE: 12545 - LINEA DE PINTURA UV - SUPERFICI MINI PLUS

PARTE: 12545 - LINEA DE PINTURA UV - SUPERFICI MINI PLUS USADA - MUY BUIENAS CONDICIONESPassline Height: 900 mm Operating side: RH, as viewed from inlet of line, LH...

AMXmachinery

PARTE: 12544 - TRITURADOR - ASTILLADOR MADERA - 58” - PRECISION

PARTE: 12544 - TRITURADOR - ASTILLADOR MADERA - 58” - PRECISIONUSADO - BUENAS CONDICIONES6 NAVAJAS TOP DISCHARGE

AMXmachinery

PARTE: 12543 - TRITURADOR - ASTILLADOR MADERA - 48” - PRECISION

PARTE: 12543 - TRITURADOR - ASTILLADOR MADERA - 48” - PRECISION USADO - BUENAS CONDICIONES

AMXmachinery

PART: 12542 - GANG RIP SAW - 30 HP - GABBIANI

PART: 12542 - GANG RIP SAW - 30 HP - GABBIANIUSED - VERY GOOD CONDITION300 MM CAPACITY CHAIN VERY GOOD CONDITION

AMXmachinery

PARTE: 12542 - SIERRA MULTIPLE - 30 HP - GABBIANI

PARTE: 12542 - SIERRA MULTIPLE - 30 HP - GABBIANI USADA - MUY BUENAS CONDICIONES CAPACIDAD 300 MM CADENA EN MUY BUENAS CONDICIONES

AMXmachinery

PART: 12541 - GANG RIP SAW - 40 HP - LOBO

PART: 12541 - GANG RIP SAW - 40 HP - LOBOUSED - VERY GOOD CONDITION LASER LIGHT

AMXmachinery

PARTE: 12541 - SIERRA MULTIPLE - 40 HP - LOBO

PARTE: 12541 - SIERRA MULTIPLE - 40 HP - LOBO USADA - MUY BUENAS CONDICIONES LUZ LASER

AMXmachinery

PARTE: 12540 - PINCH ROLLER - CAPACIDAD 62” - EVANS

PARTE: 12540 - PINCH ROLLER - CAPACIDAD 62” - EVANS USADA - BUENAS CONDICIONESCapacity with Solid Top and SegmentedBottom RollerMax.Width: 62"Feed rate 50 Feet...

AMXmachinery

PART: 12540 - PINCH ROLLER - CAPACITY 62” - EVANS

PART: 12540 - PINCH ROLLER - CAPACITY 62” - EVANS USED - GOOD CONDITIONCapacity with Solid Top and SegmentedBottom RollerMax.Width: 62"Feed rate 50 Feet Per Mi...

AMXmachinery

PART: 12496 - SHREDDER - BLOAPCO - MODELO 3CAXS3036BV - 40 HP

PART: 12496 - SHREDDER - BLOAPCO - MODELO 3CAXS3036BV - 40 HPUSED - GOOD CONDITIONModel 3CAXS3036BV(3) Rotors 36" wide30" x 36" top feed openingBaldor...

AMXmachinery

PARTE: 12496 - TRITURADORA - BLOAPCO - MODELO 3CAXS3036BV - 40 HP

PARTE: 12496 - TRITURADORA - BLOAPCO - MODELO 3CAXS3036BV - 40 HP USADO - BUENAS CONDICIONES (3) Rotores 36" ancho Abertura alimentación superior 30"...

AMXmachinery

PART: 2QW-F15 - MANUAL EDGE SANDER - PNEUMATIC - 8” HEAD

PART: 2QW-F15 - MANUAL EDGE SANDER - PNEUMATIC - 8” HEAD Handy two-handed tool that is suitable for both wood sanding and finishing of impregnating and paints, as ...

AMXmachinery

PART: 2WG-ARTEA1030 - EDGEBANDER - HOLZ-HER - ARTEA 1030

PART: 2WG-ARTEA1030 - EDGEBANDER - HOLZ-HER - ARTEA 1030ARTEA serieshighest user-optimization, productivity, precision and safety for years thanks to heavy and rigid fr...

AMXmachinery

PARTE: 2WG-ARTEA1030 - ENCHAPADORA DE CANTOS - HOLZ-HER - ARTEA 1030

PARTE: 2WG-ARTEA1030 - ENCHAPADORA DE CANTOS - HOLZ-HER - ARTEA 1030ARTEA serieshighest user-optimization, productivity, precision and safety for years thanks to heavy ...

AMXmachinery

PARTE: 2QW-F15 - LIJADORA - AIRE COMPRIMIDO - CABEZA OPCIONAL 8”

PARTE: 2QW-F15 - LIJADORA - AIRE COMPRIMIDO - CABEZA OPCIONAL 8”Handy two-handed tool that is suitable for both wood sanding and finishing of impregnating and paints, ...

AMXmachinery

PART: 2CK-LBS300-5S - 3-SIDED LINEAL BRUSH SANDER

PART: 2CK-LBS300-5S - 3-SIDED LINEAL BRUSH SANDEREliminate hand sanding with our economical sanding and de-nibbing solution for linear profileDesigned to help with your ...

AMXmachinery1

PARTE: 2CK-LBS300-5S - LIJADORA DE MOLDURAS - 3 CARAS

PARTE: 2CK-LBS300-5S - LIJADORA DE MOLDURAS - 3 CARASEliminate hand sanding with our economical sanding and de-nibbing solution for linear profileDesigned to help with ...

AMXmachinery1

SIERRA MULTIPLE 50/60 HP

SIERRA MULTIPLE 50/60 HP 2CK-MRS350The Frame is cast iron, all the main parts are enclosed, ensuring protection and perfect stabilityStraight line caterpillar fe...

AMXmachinery1

SIERRA MULTIPLE PARA CORTE DELGADO

SIERRA MULTIPL PARA CORTE DELGADO 2CK-MRS12The Frame is Cast Iron, all the main parts are enclosed, ensuring protection and perfect stabilityStraight line caterpilla...

AMXmachinery1

SIERRA MULTIPLE 50 HP

SIERRA MULTIPLE 75 HP 2CK-MRS300Production multi ripsaw with an industrial cast iron machine body. The precision cast iron chain and track system allows for maxi...

AMXmachinery1

CEPILLO 2 CARAS EJE CARDAN 32"

CEPILLO 2 CARAS EJE CARDAN 32" 2CK-GT820HDSuitable for the most demanding planing applications. The HD series are capable of high feed speeds with maximum stock...

AMXmachinery1

CEPILLO 2 CARAS 40"

CEPILLO 2 CARAS 40" 2CK-GTM1020WHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth ...

AMXmachinery1

CEPILLO 2 CARAS EJE CARDAN 24"

CEPILLO 2 CARAS EJE CARDAN 24" 2CK-GTG10HIIs capable of speeds up to 98 feet per minute and its robust cast-iron body & industrial cardan drive system ens...

AMXmachinery1

CEPILLO 2 CARAS 30" X 8"

CEPILLO 2 CARAS 30" X 8" 2CK-GT760ARDThe Cantek GT760ARD 30″ Double Surface Planer has a robust cast-iron body for industrial planing day in and day out....

AMXmachinery1

CEPILLO 2 CARAS 25" X 8"/16"/20"/24"

CEPILLO 2 CARAS 25" 2CK-GT635ARDHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smoo...

AMXmachinery1

CEPILLO 2 CARAS 16" X 6.7"

CEPILLO 2 CARAS 16" 2CK-GT400BRDHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth ...

AMXmachinery1

36" X 72" TABLA DE CORRIENTE DESCENDENTE

36" X 72" TABLA DE CORRIENTE DESCENDENTE - 2CK- 3672DTIs ergonomic and energy efficient and offer easy operator maintenance. The table is mounted on wheels ...

AMXmachinery1

MESA CORRIENTE DESCENDENTE - 1 HP

MESA CORRIENTE DESCENDENTE - 1 HP * 2CL-FT2200Is ergonomic, energy efficient, and easy to maintain. Rubber anti-slip rings and removable location stops ensure the mat...

AMXmachinery1

COLECTOR DE POLVOS - 15 HP

COLECTOR DE POLVOS - 15 HP - 2CK-DBS15Is a high efficiency indoor dust collectors generating up to 5000 CFM and are available in 10HP or 15HP. Equipped with a low R...

AMXmachinery1

COLECTOR DE POLVOS - 10 HP

COLECTOR DE POLVOS - 10 HP - 2CK-DBS10Is a high efficiency indoor dust collectors generating up to 5000 CFM and are available in 10HP or 15HP . Equipped with a low ...

AMXmachinery1

COLECTOR DE POLVOS - 7.5HP

COLECTOR DE POLVOS - 7.5HP * 2CK-UFO105BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the...

AMXmachinery1

COLECTOR DE POLVOS - 5HP

COLECTOR DE POLVOS - 5HP - 2CK-UFO103BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the...

AMXmachinery1

COLECTOR DE POLVOS - 3HP

COLECTOR DE POLVOS - 3HP - 2CK-UFO102BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the...

AMXmachinery1

PARTE: 12538 - CALDERA DE AGUA - LEFLAM - 521-050

PARTE: 12538 - CALDERA DE AGUA - LEFLAM - 521-050 MARCA: LEFLAM MODELO: 521-050 CAP: 50000 KCAL/HR PMT: 7 KG/CM2 INCLUYE EL QUEMADOR: ECO FLAM GT-D1-MBC...

AMXmachinery

SIERRA CINTA 37" - 2 EN 1 - 10HP

SIERRA CINTA 37" - 2 EN 1 - 10HP - 2CK-HB950AIs a heavy duty bandsaw that is built to last. With its industrial cast iron wheel and table assembly it can handle an...

AMXmachinery1

SIERRA CINTA 24" - 2 EN 1- 7.5HP

SIERRA CINTA 24" - 2 EN 1- 7.5HP - 2CK-HB600AIs heavy duty and built to last. With its industrial cast iron wheel and table assembly it can handle any job. Wha...

AMXmachinery1

SIERRA CINTA 24" - 2 EN 1- 5HP

SIERRA CINTA 24" - 2 EN 1- 5HP 2CK-HB600AIs heavy duty and built to last. With its industrial cast iron wheel and table assembly it can handle any job. What ma...

AMXmachinery1

SIERRA CINTA 24" - 3HP

SIERRA CINTA 24" - 3HP 2CK-HB600RIncorporates a robust design with economical price point. With its industrial cast iron wheels and table assembly it can h...

AMXmachinery1

SIERRA CINTA 20" - 3HP

SIERRA CINTA 20" - 3HP 2CK-HB500RIncorporates a robust design with economical price point. With its industrial cast iron wheels and table assembly it can hand...

AMXmachinery1

PARTE: 12537-2 - AGITADOR - ASPAS ACERO INOXIDABLE - 3 HP - RELACION 12:1

PARTE: 12537-2 - AGITADOR - ASPAS ACERO INOXIDABLE - 3 HP - RELACION 12:1 USADOS 3 PIEZAS DISPONIBLES

AMXmachinery

PARTE: 12537-1 - EXTRACTORES PARA CASETAS PINTURA - 30” DIAMETRO - 5 HP

PARTE: 12537-1 - EXTRACTORES PARA CASETAS PINTURA - 30” DIAMETRO - 5 HP USADO MOTOR 5 HP, 220/440V, 3 FASES 30” DIAMETRO MARCA DAYTON USA

AMXmachinery

PART: 1AM-3011-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH - WITH GUIDE AND STOP

PART: 1AM-3011-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH - WITH GUIDE AND STOPSIDE ROLLER TABLES Use with saws, planers, edgebanders, jointers, et...

AMXmachinery

PARTE: 1AM-3011 – MESA DE RODILLOS – ENTRADA Y SALIDA MAQUINAS – 120 CM LARGO – CON TOPE Y GUIA

PARTE: 1AM-3011 – MESA DE RODILLOS – ENTRADA Y SALIDA MAQUINAS – 120 CM LARGO – CON TOPE Y GUIA MESAS LATERALES PARA SIERRAS TRONZADORAS, CORTADORES RAPID...

AMXmachinery

PART: 1AM-3010-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH

PART: 1AM-3010-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH SIDE ROLLER TABLES Use with saws, planers, edgebanders, jointers, etc.120 cm (47”)...

AMXmachinery

PARTE: 1AM-3010 – MESA DE RODILLOS – ENTRADA Y SALIDA MAQUINAS – 120 CMS LARGO

PARTE: 1AM-3010 – MESA DE RODILLOS – ENTRADA Y SALIDA MAQUINAS – 120 CMS LARGO MESAS LATERALES PARA SIERRAS, CEPILLOS, CANTEADORAS, ETC. PARA ENTRADA Y S...

AMXmachinery

PARTE: 2GB - CUCHILLAS CORRUGADA PARA MOLDURADORAS, CEPILLOS, CANTEADORAS

PARTE: 2GB - CUCHILLAS CORRUGADA PARA MOLDURADORAS, CEPILLOS, CANTEADORASPARTE: 2GB-SCMX31250-HT40 - 25” largo x 2.5” ancho x 5/16” espesor - HSSTenemos tambien en...

AMXmachinery

PARTE: 4EL-DSX - SIERRAS ESCUADRADORAS VERTICALES - ELCON - SERIE DSX

PARTE: 4EL-DSX - SIERRAS ESCUADRADORAS VERTICALES - ELCON - SERIE DSX SERIE DSX-155 SERIE DSX-185 SERIE DSX-215 SERIE DSXL-155 SERIE DSXL-185 SER...

AMXmachinery

PARTE: 4EL-D - SIERRAS ESCUADRADORAS VERTICALES - ELCON - SERIE D

PARTE: 4EL-D - SIERRAS ESCUADRADORAS VERTICALES - ELCON - SERIE D SERIE D-155 SERIE D-185 SERIE D-215 Model & Dimensions (mm) 155...

AMXmachinery

PARTE: 4EL-DS - SIERRAS ESCUADRADORAS VERTICALES - ELCON - SERIE DS

PARTE: 4EL-DS - SIERRAS ESCUADRADORAS VERTICALES - ELCON - SERIE DS SERIE DS-155 SERIE DS-185 SERIE DS-215 SERIE DSL-155 SERIE DSL-185 SERIE DS...

AMXmachinery

PART: 12535-E - DOWEL MILLING MACHINE - HAWKER

PART: 12535-E - DOWEL MILLING MACHINE - HAWKERUSED – GOOD CONDITION – AS IS 2” MAXIMUM DIAMETER

AMXmachinery

PARTE: 12535 - BASTONERA – HAWKER

PARTE: 12535 - BASTONERA – HAWKER USADA – BUENAS CONDICIONES 2” diámetro máximo

AMXmachinery

PART: 12536-E - OPTIMIZING CUTOFF SAW - OMGA T2030 NC ROLL-FEED

PART: 12536-E - OPTIMIZING CUTOFF SAW - OMGA T2030 NC ROLL-FEED USED Roll-Feed Optimizing and Defecting Cut-Off Saw Precise and Safe Feeding via Eleven Solid ...

AMXmachinery

PARTE: 12536 - SIERRA OPTIMIZADORA – OMGA T2030

PARTE: 12536 - SIERRA OPTIMIZADORA – OMGA T2030 USADA - MUY BUENAS CONDICIONES Precise and Safe Feeding via Eleven Solid Feed Rolls Main Saw Motor: 8.7 HP, ...

AMXmachinery

PART: 2CK- ST152C-E - SINGLE END TENONER - 1 SIDE

PART: 2CK- ST152C-E - SINGLE END TENONER - 1 SIDE NEW WITH WARRANTYOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in...

AMXmachinery1

PARTE: 2CK-ST152C - ESPIGADORA SENCILLA - 1 LADO

PARTE: 2CK-ST152C - ESPIGADORA SENCILLA - 1 LADO NUEVO CON GARANTIAOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in ...

AMXmachinery1

PART: 12534-E - DOUBLE TABLE SLOT MORTISER - BALESTRINI

PART: 12534-E - DOUBLE TABLE SLOT MORTISER - BALESTRINI USED - CHECKED AND CLEANED440V, 3 PHASE

AMXmachinery

PARTE: 12534 - ESCOPLO OSCILANTE - 2 MESAS - BALESTRINI

PARTE: 12534 - ESCOPLO OSCILANTE - 2 MESAS - BALESTRINI USADO - MUY BUENAS CONDICIONES440V, 3 FASES

AMXmachinery

PART: 12533-E - DOUBLE TABLE SLOT MORTISER - BALESTRINI

PART: 12533-E - DOUBLE TABLE SLOT MORTISER - BALESTRINI USED - CHECKED AND CLEANEDModel: MicronMax oscillation length: 120mm (4.8")Max slot depth: 80mm (3.2&...

AMXmachinery

PARTE: 12533 - ESCOPLO OSCILANTE - 2 MESAS - BALESTRINI

PARTE: 12533 - ESCOPLO OSCILANTE - 2 MESAS - BALESTRINI USADO - MUY BUENAS CONDICIONESModelo MicronMax oscillation length: 120mm (4.8")Max slot depth: 80mm (3....

AMXmachinery

PART: 2CK-DWM-36-E - DRAWER ASSEMBLY CLAMP

PART: 2CK-DWM-36-E - DRAWER ASSEMBLY CLAMPQuick settingStrong machine structure ensures square drawer boxesErgonomic design for convenient loading and unloadingKEY ADVANT...

AMXmachinery1

PART: 2QM-R-RCGS-E - ROLLER COATER GLUE SPREADERS - 1, 2 SIDES - 24", 48", 63" WIDE

ROLLER COATER GLUE SPREADERS PART: 2QM-R-.RCGS-1-24-1.75-E - GLUE SPREADER - 1 SIDE - 24” WIDE - 1.75” OPEN PART: 2QM-R-RCGS-1-24-1.75-E - GLUE SPREADER -...

AMXmachinery

PARTE: 2QM-R-RCGS - ENGOMADORAS 1 Y 2 LADOS - ANCHO 24", 48" Y 63"

PARTE: 2QM-R-RCGS-1-24-1.75 - ENGOMADORA - 1 LADO – ANCHO 24” - 1.75” ABERTURA PARTE: 2QM-R-RCGS-1-24-1.75 - ENGOMADORA - 2 LADOS – ANCHO 24” - 1.75” ...

AMXmachinery

PART: 4BA-DPM-ED-2141-E – VERTICAL PANEL SAW - CAP. 2100 MM X 4100 MM X 60 MM

PART: 4BA-DPM-ED-2141-E – VERTICAL PANEL SAW - CAP. 2100 MM X 4100 MM X 60 MM - BALA New with warrantyDemo model with about 30 hours on it Specifications - ...

AMXmachinery

PARTE: 4BA-DPM-ED-2141 – SIERRA ESCUADRADORA VERTICAL – CAP. 2100 MM X 4100 MM X 60 MM

PARTE: 4BA-DPM-ED-2141 – SIERRA ESCUADRADORA VERTICAL – CAP. 2100 MM X 4100 MM X 60 MM Nueva con garantía Demo model with about 30 hours on it Specificati...

AMXmachinery

PART: 2ST-COMPACT-PLUS-TALL- 5207-E - VERTICAL PANEL SAW - COMPACT PLUS TALL - CAP. 181” X 81” X 2-3/8”

PART: 2ST-COMPACT-PLUS-TALL- 5207-E - VERTICAL PANEL SAW - COMPACT PLUS TALL - CAP. 181” X 81” X 2-3/8” NEW WITH WARRANTY Motor 5 HP• Swiss made quality fo...

AMXmachinery

PARTE: 2ST-COMPACT-PLUS-TALL- 5207 - ESCUADRADORA VERTICAL - COMPACTA - CAP. 181” X 81” X 2-3/8”

PARTE: 2ST-COMPACT-PLUS-TALL- 5207 - ESCUADRADORA VERTICAL - COMPACTA - CAP. 181” X 81” X 2-3/8”NUEVA CON GARANTIA Motor 5 HP• Swiss made quality for accuracy...

AMXmachinery

PARTE: 12532 - UNIDORA SABANAS CHAPA - SPLICER - KUPER

PARTE: 12532 - UNIDORA SABANAS CHAPA - SPLICER - KUPER USADA - BUENAS CONDICIONESModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min...

AMXmachinery

PART: 12532-E - CROSS FEED SPLICER - KUPER

PART: 12532-E - CROSS FEED SPLICER - KUPER USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating w...