PARTE: 2PI-CMJ -MAQUINA DE COPEADOIs a machine designed for chip free coping or tenoning of either square or profiled parts without the need for a back-up piece or chip breaker. One motor with a belt is a great fit for smaller shops that don’t need to change between multiple profiles.No backer board or chip breakers requiredTear out free parts every timeAccurate spindle adjustment for tool alignmentPart stays fixed while the carriage moves

PARTE: 2PI-CMJ-HSK - MAQUINA DE COPEADOIs a machine designed for chip free coping or tenoning of either square or profiled parts without the need for a back-up piece or chip breaker. Two independent spindles with the tool changer is a great fit for medium to large shops that need to quick-change between multiple profiles per day.No backer board or chip breakers requiredTear out free parts every timeAccurate spindle adjustment for tool alignmentPart stays fixed while the carriage movesDual Air-L...

PARTE: 2PI-BOA-S - ARMADORA DE GABINETESIs a servo-assisted manually operated Case Clamp designed to clamp cabinet boxes, drawer boxes and case goods that have been doweled together.Easy-to-use Servo-Assisted Manual OperationFastest way to adjust between clamping smaller and larger box sizesHeavy Frame Construction

PARTE: 2PI-MMTX - ESPIGADORA Y MORTAJADORA - 6 EJESIs a dual carriage, 6 axis CNC controlled Miter Mortise and Tenon Machining Center – tailored specifically to meet high-volumeproduction requirements.Elimination of complicated machine setups climb cut of both tenon and mortise cuts for a “tear out” free cut.Climb cut of both tenon and mortise cuts for a tear out free cut.The ability to cut MDF paper or vinyl wrapped profiles.Eliminates the need for applying inlays.Reduces the maintenance...

PARTE: 2PI-MMTJ - ESPIGADORA Y MORTAJADORAIs a full 3 Axis CNC machining center used for producing high quality miter joints used in cabinet door manufacturing. This machine produces between 200-275 doors per 8-hour shift with one operator.Smaller Footprint: 30% Less Floor Space25% More Powerful40% More Clearance To Load Short PartsEfficient ManeuverabilityFront Access Control PanelExtra Safety GuardingRear Machine Enclosure As A StandardSwivel TouchscreenTable Plates Swivel To 90 DegreesLED Li...

PARTE: 2PI-M45 - ESPIGADORA Y MORTAJADORAIs our entry level miter, mortise, and tenon machine. One of our most popular wood cnc machines that features side pressure clamps to ensure the part is firmly against the side fence prior to clamping. This guarantees a perfect 45˚ miter every time. Will produce 150-175 doors per shift.Elimination of complicated machine setups climb cut of both tenon and mortise cuts for a “tear out” free cut.The ability to cut MDF paper or vinyl wrapped profiles.Eli...

PARTE: 2PI-OTF - ESPIGADORA HORIZONTALIt is designed to belt position the workpiece, bore a hole, then advance the workpiece to the correct location for the inserter, inject glue or water (for pre glued dowels), and fire the dowel into the hole. A part is placed into the work zone referencing the back fence and advancing the part onto the belt. The belt system allows constant part feeding into the machine.Elimination of complicated machine setupQuick, accurate assemblyGain production times on C...

PARTE: 2PI-HPJ - ESPIGADORA HORIZONTAL - INSERTADORA DE PERNOSIs a horizontal point to point bore and dowel insertion machining center. It is designed to CNC position the spindle, bore a hole, then CNC position the dowel inserter, inject glue or water (for pre-glued dowels), and insert the dowel into the hole.Elimination of complicated machine setupQuick, accurate assemblyGain production times on CNC routers and Point to Points by shifting boring and doweling

PARTE: 2PI-HP5D - ESPIGADORA HORIZONTALIs designed to machine parts used in TFL (thermally fused laminate), TFM (thermally fused melamine), paper wrapped, vinyl wrapped or thermofoil doors.Is a horizontal point to point bore and dowel insertion and panel groove machining center. It is designed to CNC position a drill spindle, bore a hole, then CNC position the dowel inserter, inject glue or water (for pre-glued dowels), and insert the dowel into the hole. As well as cut a panel groove in the cen...

PARTE: 2PI-H49 - INSERTADORA DE PERNOSIs a horizontal point to point bore and dowel insertion machining center.It is designed to CNC position the spindle, bore a hole, then CNC position the inserter, inject glue or water (for pre-glued dowels), and fire the dowel into the hole.Elimination of complicated machine setupQuick, accurate assemblyGain production times on CNC routers and point to points by shifting boring and doweling