PARTE; 2PI-HPMT - ESPIGADORA HORIZONTAL Has a working length of 48”. This machine has a full three axis CNC control. One spindle is used for the mortise work and a separate spindle is used for tenon work. Two working zones are used, allowing for left and right hand programs.Elimination of complicated machine setupProvide a stronger productEasy assembly by providing self aligning joints

PARTE: 2PI-MTH - ESPIGADORA HAUNCHINGIs a multi-function, multi-axis Horizontal Machining Center designed to machine many of the components of Kitchen Cabinets all in one machine.Efficiency – haunch, mortise, and tenon all on one machineSpeed – increased cabinet door production

PARTE: 2PI-HMJ - ESPIGADORA HAUNCHINGIs a jump haunch machine for beaded face frames.Simple and user friendly interface.Small footprint.Increased production by its ability to double up parts on one cut.Ease the assembly process by providing self aligning joints.

PARTE: 2PI-CMJ -MAQUINA DE COPEADOIs a machine designed for chip free coping or tenoning of either square or profiled parts without the need for a back-up piece or chip breaker. One motor with a belt is a great fit for smaller shops that don’t need to change between multiple profiles.No backer board or chip breakers requiredTear out free parts every timeAccurate spindle adjustment for tool alignmentPart stays fixed while the carriage moves

PARTE: 2PI-CMJ-HSK - MAQUINA DE COPEADOIs a machine designed for chip free coping or tenoning of either square or profiled parts without the need for a back-up piece or chip breaker. Two independent spindles with the tool changer is a great fit for medium to large shops that need to quick-change between multiple profiles per day.No backer board or chip breakers requiredTear out free parts every timeAccurate spindle adjustment for tool alignmentPart stays fixed while the carriage movesDual Air-L...

PARTE: 2PI-MMTX - ESPIGADORA Y MORTAJADORA - 6 EJESIs a dual carriage, 6 axis CNC controlled Miter Mortise and Tenon Machining Center – tailored specifically to meet high-volumeproduction requirements.Elimination of complicated machine setups climb cut of both tenon and mortise cuts for a “tear out” free cut.Climb cut of both tenon and mortise cuts for a tear out free cut.The ability to cut MDF paper or vinyl wrapped profiles.Eliminates the need for applying inlays.Reduces the maintenance...

PARTE: 2PI-MMTJ - ESPIGADORA Y MORTAJADORAIs a full 3 Axis CNC machining center used for producing high quality miter joints used in cabinet door manufacturing. This machine produces between 200-275 doors per 8-hour shift with one operator.Smaller Footprint: 30% Less Floor Space25% More Powerful40% More Clearance To Load Short PartsEfficient ManeuverabilityFront Access Control PanelExtra Safety GuardingRear Machine Enclosure As A StandardSwivel TouchscreenTable Plates Swivel To 90 DegreesLED Li...

PARTE: 2PI-M45 - ESPIGADORA Y MORTAJADORAIs our entry level miter, mortise, and tenon machine. One of our most popular wood cnc machines that features side pressure clamps to ensure the part is firmly against the side fence prior to clamping. This guarantees a perfect 45˚ miter every time. Will produce 150-175 doors per shift.Elimination of complicated machine setups climb cut of both tenon and mortise cuts for a “tear out” free cut.The ability to cut MDF paper or vinyl wrapped profiles.Eli...

PARTE: 2PI-OTF - ESPIGADORA HORIZONTALIt is designed to belt position the workpiece, bore a hole, then advance the workpiece to the correct location for the inserter, inject glue or water (for pre glued dowels), and fire the dowel into the hole. A part is placed into the work zone referencing the back fence and advancing the part onto the belt. The belt system allows constant part feeding into the machine.Elimination of complicated machine setupQuick, accurate assemblyGain production times on C...

PARTE: 2PI-HPJV - ESPIGADORA HORIZONTAL Y VERTICALIs a Horizontal and Vertical Bore and Dowel insertion CNC machining center used for case construction in cabinet and/or furniture manufacturing. One of the best bore drilling machines available.Elimination of complicated machine setupQuick, accurate assemblyGain production times on CNC routers and Point to Points by shifting boring and doweling 

PARTE: 2PI-HPLD - ESPIGADORA HORIZONTAL CON BLOQUEOThe HPLD is a horizontal point to point Lockdowel inserting machine and one of the finest line boring machines for cabinets available. This machine will insert H-clips, Channel Locks and Spring Pins with ease.Using CNC control, this machine positions the drilling spindle to bore holes and insert the Lockdowel hardware.Elimination of complicated machine setupNo glue or water required for dowel insertionNo clamping neededFaster, Stronger and easie...

PARTE: 2PI-HPJ - ESPIGADORA HORIZONTAL - INSERTADORA DE PERNOSIs a horizontal point to point bore and dowel insertion machining center. It is designed to CNC position the spindle, bore a hole, then CNC position the dowel inserter, inject glue or water (for pre-glued dowels), and insert the dowel into the hole.Elimination of complicated machine setupQuick, accurate assemblyGain production times on CNC routers and Point to Points by shifting boring and doweling

PARTE: 2PI-HP5D - ESPIGADORA HORIZONTALIs designed to machine parts used in TFL (thermally fused laminate), TFM (thermally fused melamine), paper wrapped, vinyl wrapped or thermofoil doors.Is a horizontal point to point bore and dowel insertion and panel groove machining center. It is designed to CNC position a drill spindle, bore a hole, then CNC position the dowel inserter, inject glue or water (for pre-glued dowels), and insert the dowel into the hole. As well as cut a panel groove in the cen...

PARTE: 2PI-H49 - INSERTADORA DE PERNOSIs a horizontal point to point bore and dowel insertion machining center.It is designed to CNC position the spindle, bore a hole, then CNC position the inserter, inject glue or water (for pre-glued dowels), and fire the dowel into the hole.Elimination of complicated machine setupQuick, accurate assemblyGain production times on CNC routers and point to points by shifting boring and doweling

PARTE: 2TA-SET-106TS – ESPIGADORA DOBLE DE CADENA – 6 CABEZAS – 120” ANCHO Nueva con garantiaOpcionales:Extra Infeed 42” LengthTotal Enclosure CoverFeed MagazineAuto Transfer Line (4 ft x 8 ft) Transfer TableOptional Jump Shaper and Finish Shaper Cutter headsOptional Center Split Saw Station Features:• The automatic high-speed through feed device allows for perfect finishing at speeds rangingfrom 12 ~ 52 FPM.• Suitable for mass production of woodworking factory for processin...

PARTE: 2CK-ECT SERIES - DOUBLE END TENONER - 8 CABEZAS - 141” ANCHOThey are available with up to (8) spindles (4-per side) and come in widths from 51” to 141”.  These double end tenoners are ideal for door, furniture, & window production and more.  The ECT series can be customized for your specific needs with a wide range of processing units and features.   The ECT are available as a stand-alone solution or can be purchased in a line for processing all four sides of a workpiece auto...

PARTE: 2TA-SET-86TS – ESPIGADORA DOBLE DE CADENA – 6 CABEZAS – 96” ANCHO Nueva con garantiaThe automatic high-speed through feed device allows for perfect finishing at speeds ranging from 12 ~ 52 FPM. Suitable for mass production of wood working factory for processing of double end cutting, tenoning, grooving, moulding, and sanding. It is a powerful machine great for heavy-duty production. In addition to the double end cutting, all the settings and other processing can...

PARTE: 2TA-SET-46TS – ESPIGADORA DOBLE DE CADENA – 6 CABEZAS – 48” ANCHO Nueva con garantiaThe automatic high-speed through feed device allows for perfect finishing at speeds ranging from 12 ~ 52 FPM.Suitable for mass production of wood working factory for processing of double end cutting, tenoning, grooving, moulding, and sanding.It is a powerful machine great for heavy-duty production.In addition to the double end cutting, all the settings and other processing can also be exe...

PARTE: 2TA-SET-TRANS – MESA PARA TRANSFERIR TABLEROS ENTRE ESPIGADORAS DOBLES DE CADENA Nueva con garantíaDiseñada a la medida para transferir material continuamente entre 2 espigadoras dobles de cadenaTableros, puertas, etc. Aumenta la eficiencia y disminuye o elimina los manejos manuales Video: https://vimeo.com/639803360

PARTE: 2DO-DT610 - ESPIGADORA DOBLE - DE MESA - CAPACIDAD 6 - 8 PIES - DT-610 NUEVA CON GARANTIAESCUADRA Y CORTA A LARGO, ARRIBA Y DEBAJO DE LA PUERTA O TABLERO2 SIERRAS CORTA2 SIERRAS SCORING CORTE LIMPIO EN AMBOS LADOS Features and Benefits: Easy to load table - Safely locks in place while loading. One operator can easily load the door or panel - Greater efficiency. One stationary head and one movable head - Easy to change. Fixed side, saw tilts; Mova...