PARTE: 2PI -TSS - SIERRA PARA CORTE, RECORTE Y RANURADOWas designed to cut materials that are susceptible to tear out as well as pack cutting of multiple parts at the same time.Tear-out FREE! Absolutely no tear-out on the cut boardsVery safe operation for the userMore accurate than a manual chop sawFrame is designed to sit flat or tilted at 10 degree angleTigerStop ready

PARTE: 2PI-2S - ESCUADRADORAIs a multi-axis, mulit-function CNC horizonal machine. It is designed to size edge glued panels safely and accurately.SafeQuickAccurateSimple to use

PARTE: SIERRA PENDULO USADA - BUENAS CONDICIONES

PARTE: 12708 - ASERRADERO - WOODMIZER LT40 - MOTOR ELECTRICO 20 HP USADO - BUENAS CONDICIONES

PARTE: 12709 - AFILADORA DE SIERRAS CINTAS - PARA ASERRADERO WOODMIZER USADO - BUENAS CONDICIONES

PARTE; 2PI-HPMT - ESPIGADORA HORIZONTAL Has a working length of 48”. This machine has a full three axis CNC control. One spindle is used for the mortise work and a separate spindle is used for tenon work. Two working zones are used, allowing for left and right hand programs.Elimination of complicated machine setupProvide a stronger productEasy assembly by providing self aligning joints

PARTE: 2PI-MTH - ESPIGADORA HAUNCHINGIs a multi-function, multi-axis Horizontal Machining Center designed to machine many of the components of Kitchen Cabinets all in one machine.Efficiency – haunch, mortise, and tenon all on one machineSpeed – increased cabinet door production

PARTE: 2PI-HMJ - ESPIGADORA HAUNCHINGIs a jump haunch machine for beaded face frames.Simple and user friendly interface.Small footprint.Increased production by its ability to double up parts on one cut.Ease the assembly process by providing self aligning joints.

PARTE: 12712 - LIJADORA BANDA ANCHA - 43” ANCHO - 1 LIJA USADA - BUENAS CONDICIONES Falta el motorParece marca Cemco

PARTE: 12713 - TALADRO MULTIPLE - USADO PARA PUERTAS DE MADERA USADA - BUENAS CONDICIONES

PARTE: 12714 - PRENSA NEUMATICA USADA - BUENAS CONDICIONESFABRICANTE: ESTRUCTURAS Y MAQUINAS CHACON

PARTE: 12706 - RACK PARA PRENSA TABLEROS - JLT - TAYLOR Usado - Buenas condiciones   12 PIES LARGO (3.65 M LARGO) 30 SARGENTOS

PARTE: 12706 - ALIMENTADOR STEFF 2034 DE 3 RUEDAS Usado - Buenas condiciones

PARTE: 12705 - CANTEADORA - DELTA - DJ-20 USADA - BUENAS CONDICIONES

PARTE: 12704 - MOLDURADORA - 4 CABEZALES - SICAR V4 220 USADA - BUENAS CONDICIONES   MOTORES 3 FASES 440V TIENE TRANSFORMADOR PARA 220V

PARTE: 2JT-812-B-M1-3.5J-36L-H-C - SARGENTOS - ESTANDARD - 3.5” ALTURA - 36” CAPACIDAD Nuevo con garantía

PARTE: 2JT-WR3840P52 - TALADRO APRETADOR - NEUMATICO Nuevo con garantía

PARTE: 1SL-DC-WPM13 - CUCHILLAS PARA MOLDURAS - CEPILLO MOLDURADOR Espesor 1/8”, ancho de 25mm y 35 mmPARTE #DESCRIPCIONDC-WPM13-1Clave 1   (longitud de corte  2-1/2”)DC-WPM13-2Clave 2   (longitud de corte  3” )DC-WPM13-3Clave 3   (longitud de corte  4-1/2”)DC-WPM13-4Clave 4   (longitud de corte  6”)

PARTE: 2PI-CMJ -MAQUINA DE COPEADOIs a machine designed for chip free coping or tenoning of either square or profiled parts without the need for a back-up piece or chip breaker. One motor with a belt is a great fit for smaller shops that don’t need to change between multiple profiles.No backer board or chip breakers requiredTear out free parts every timeAccurate spindle adjustment for tool alignmentPart stays fixed while the carriage moves

PARTE: 2PI-CMJ-HSK - MAQUINA DE COPEADOIs a machine designed for chip free coping or tenoning of either square or profiled parts without the need for a back-up piece or chip breaker. Two independent spindles with the tool changer is a great fit for medium to large shops that need to quick-change between multiple profiles per day.No backer board or chip breakers requiredTear out free parts every timeAccurate spindle adjustment for tool alignmentPart stays fixed while the carriage movesDual Air-L...