PARTE: 2EX-DCF-PJ30 - EXTRACTOR DE POLVOS - FILTRO - PULSE JETAutomatic air pulse to constantly release dust particles from filter media.Maximum CFM up to 14000Reduces fine dust clogging of filtersGreatly reduces maintenanceReduces restriction and greatly improves airflowFilter inlet size: 20″Standard Filtration to 5 microns for general purpose applicationsOptional Filtration to 1 micron for extremely fine or powder like dust particles

PARTE: 2EX-DCF-218 - EXTRACTOR DE POLVOS - FILTRO - 2 SECCIONESTyphoon offers 2 sections baghouse sock filter in open or enclosed models. Both of these models have 9 1-micron, 6-inch filter socks per section with a 16 inch inlet port to fit the magnum series dust collectors. The open model should not be used in direct exposure of rain or water, while the enclosed model is for outdoor use.

PARTE: 2EX-DCF-327 - EXTRACTOR DE POLVOS - FILTRO - 3 SECCIONESTyphoon offers 3 sections baghouse sock filter in open or enclosed models. Both of these models have 9 filter socks per section with a 16 inch inlet port to fit the magnum series dust collectors. The open model should not be used in direct exposure of rain or water, while the enclosed model is for outdoor use.

PARTE: 2EX-DC-3525E - COLECTOR DE POLVOS EXTERIOR - 25 HPThis 25 horsepower, 3 phase outdoor baghouse dust collector is quipped with 8 filter bags capable of 132 cubic feet of storage, 1050 CFM airflow with a 18 inch inlet port and a 27-inch fan capable of 1725 RPM. Magnetic starter included. 

PARTE: 2EX-DC-3515E - COLECTOR DE POLVOS EXTERIOR - 15 HPThis 15 horsepower, 3 phase outdoor baghouse dust collector is quipped with 6 filter bags capable of 72 cubic feet of storage, 8100 CFM airflow with a 14 inch inlet port and a 25-inch fan capable of 1725 RPM. Magnetic starter included. 

PARTE: 2EX-DC-3510E - COLECTOR DE POLVOS EXTERIOR - 10 HPThis 10 horsepower, 3 phase outdoor baghouse dust collector is quipped with 3 filter bags capable of 36 cubic feet of storage, 5750 CFM airflow with a 12 inch inlet port and a 23.5-inch fan capable of 3450 RPM. Magnetic starter included.

PARTE: 2EX-DB-250 - EXTRACTOR DE POLVOS - 25 HPOur dust blowers are made up of a heavy duty dynamically balanced vaneaxial fanwith safety guards on all inlets. The steel impeller is mounted directly to the shaft ofthe stand-mounted motor. Motors are available from 5 to 25 horsepower, 3 phaseelectric and have options for magnetic starters and remote control. Single phaseelectric motors are available for blowers up to 7.5 horsepower.Magnetic starter included.See comparison chart below for specif...

PARTE: 2EX-DB-200 - EXTRACTOR DE POLVOS - 20 HPOur dust blowers are made up of a heavy duty dynamically balanced vaneaxial fanwith safety guards on all inlets. The steel impeller is mounted directly to the shaft ofthe stand-mounted motor. Motors are available from 5 to 25 horsepower, 3 phaseelectric and have options for magnetic starters and remote control. Single phaseelectric motors are available for blowers up to 7.5 horsepower.Magnetic starter included.See comparison chart below for specif...

PARTE: 2EX-DB-150 - EXTRACTOR DE POLVOS - 15 HPOur dust blowers are made up of a heavy duty dynamically balanced vaneaxial fanwith safety guards on all inlets. The steel impeller is mounted directly to the shaft ofthe stand-mounted motor. Motors are available from 5 to 25 horsepower, 3 phaseelectric and have options for magnetic starters and remote control. Single phaseelectric motors are available for blowers up to 7.5 horsepower.Magnetic starter included.See comparison chart below for specif...

PARTE: 2EX-DB-100 - EXTRACTOR DE POLVOS - 10 HPOur dust blowers are made up of a heavy duty dynamically balanced vaneaxial fanwith safety guards on all inlets. The steel impeller is mounted directly to the shaft ofthe stand-mounted motor. Motors are available from 5 to 25 horsepower, 3 phaseelectric and have options for magnetic starters and remote control. Single phaseelectric motors are available for blowers up to 7.5 horsepower.Magnetic starter included.See comparison chart below for specif...

PARTE: 2EX-DB-75.3 - EXTRACTOR DE POLVOS - 7.5HPOur dust blowers are made up of a heavy duty dynamically balanced vaneaxial fanwith safety guards on all inlets. The steel impeller is mounted directly to the shaft ofthe stand-mounted motor. Motors are available from 5 to 25 horsepower, 3 phaseelectric and have options for magnetic starters and remote control. Single phaseelectric motors are available for blowers up to 7.5 horsepower.Magnetic starter included.See comparison chart below for speci...

PARTE: 2EX-DB-50.3 - EXTRACTOR DE POLVOS - 5HPOur dust blowers are made up of a heavy duty dynamically balanced vaneaxial fanwith safety guards on all inlets. The steel impeller is mounted directly to the shaft ofthe stand-mounted motor. Motors are available from 5 to 25 horsepower, 3 phaseelectric and have options for magnetic starters and remote control. Single phaseelectric motors are available for blowers up to 7.5 horsepower.Magnetic starter included.See comparison chart below for specific...

PARTE: 2EX-RC-10 -DESCARGADOR DE TOLVAS - ALTA CAPACIDAD - 3HPThis 3-phase high capacity airlock rotary feeder has a transfer capacity of 38 CFM and uses a 3 amp, 1 HP motor. It also comes equipped with both a 16-inch inlet and outlet port and weighs 300 pounds. Magnetic starter included. See comparison chart below for specifications.

PARTE: 2EX-RC-04 - DESCARGADOR DE TOLVAS - 3HPThis 3-phase standard airlock rotary feeder has a transfer capacity of 10 CFM and uses a 3 amp, 1/2 HP motor. It also comes equipped with both a 16-inch inlet and outlet port and weighs 77 pounds. Magnetic starter included. See comparison chart below for specifications.

PARTE: 2EX-RO-11.1 - RUEDAS DE REPUESTO - ALIMENTADORRubber Resaw Roller (4-3/4″ x 1″)

PARTE: 2EX-RO-12 - RUEDAS DE REPUESTO - ALIMENTADORDetails:Complete Roller (4-3/4″ x 2-5/16″)This listing is for a set of one (1) new rubber power feeder roller with the following dimensions:Diameter: 120mm (4-3/4 inches)Width: 60mm (2-5/16 inches)This replacement wheel is designed for most 1 horsepower feeders equipped with split rims. It includes both the tire and wheel molded into one unit for convenience and durability.

PARTE: 2EX-RO-12PM - RUEDAS DE REPUESTO - ALIMENTADORComplete Roller (4-3/4″ x 2-5/16″)

PARTE: 2EX-XF-3J - ALIMENTADOR - 3 RUEDAS - 1/4 HP3 Rollers, 4 SpeedsFWD & REVSingle Phase 110V Only1/4 HP MotorOptional quick hold mountSpecifications: Horsepower: 1/4Voltage: 110VPhase(s): SingleNumber of Rollers: 3Number of Speeds: 4Speeds: 20, 26, 33, 43Suspension: 1/2"Roller Size: 3-1/8" x 1-3/16"Weight: 75 lbs

PARTE: 2EX-XF-M3 - ALIMENTADOR - 3 RUEDAS - 1/8 HP3 RollersVariable Speed (6.5 – 56 fpm)Forward/ReverseUniversal Stand IncludedSpecifications: Number of Rollers: 3Min Speed (ft/min): 6.5Max Speed: 56

PARTE: 2EX-XF-DC4.1 - ALIMENTADOR - 4 RUEDAS - 0.7 HPFeatures a 4-roller system with variable speeds. Includes the 2/3HP DC brushless servo motor for higher torque and better variable speed control than a 1HP AC motor.4 RollersFWD & REV1PH or 3PH 230VDC Brushless Servo Motor120mm x 60mm RollersInfinitely variable feed speeds 7-72ft/minSpecifications: Horsepower: .7HPVoltage: 230VPhase(s): 1 or 3Number of Rollers: 4Number of Speeds: VariableSpeeds: 7-72Min Speed (ft/min): 7Max Speed: 72Suspensio...