PARTE: 12742 - SIERRA CINTA 34"Tested and works as it should.No brake

PARTE: 12741 - SIERRA CINTA 34" Tested and works as it should.46" x 31" Tilt TableNo Brake

PARTE: 12740 - HORNO DE AIRE CALIENTE Unit was tested and concluded that the thermostat needs replaced. Temp hits and maintains 190°.Tunnel measures 16" wide and 8" tall 46" long

PARTE: 12739 - HORNO DE AIRE CALIENTE  Tested and works as it should.208V OnlyDrive bar roller styleConveyor is 69" Long

PARTE: 12738 - COMPACTADORA HORIZONTAL DE CARTONAutomatic wire tier is missing on one side.Machines operates in manual mode only, operator must remain in contact with switch while in operationTested and works as it should in manual mode wired, 480VMachine will work as is, but must be manually tied, or run continuously without ties.Unit will need evaluated and programmed to utilize PLC and monitorUpgrades were utilized but look as though they were later abandoned. There is a PLC and Touch screen ...

PARTE: 12737 - COMPACTADORA HORIZONTAL DE CARTONMaren Engineering Corp. model 122-300 horizontal automatic balerLincoln motor rated at 20 HP, 1750 RPMElectrical specifications: 440V, 25A, 3 Phase, 60Hz30" x 30" x Feed Hopper Can Be Operated In Manual Or Automatic Tested and works as it should.

PARTE: 12736 - COMPACTADORA VERTICAL DE CARTONLoad King vertical baler36" x 60"208-230/460V, 3-Phase power requirementEquipped with a hydraulic press head and bottom bale ejector systemSafety lift gate and dual-hand control stationShows normal signs of usageMotor Draws High Amperage. Sold AS ISTested and works as it should.

PARTE: 12735 - COMPACTADORA VERTICAL DE CARTONFox Manufacturing Co. (Fox Baler) Vertical Downstroke BalerModel: 72Serial: 944086Features a Baldor 10 HP Industrial Motor (Cat. No. CM3714T)Motor Specs: 208-230/460V, 1725 RPM, 3 Phase, 60Hz, 215TC FrameControl panel marked for 440 VoltsIncludes manual control selector (Up/Down/Auto/Man)Bale size is approx 72" x 30 x 20"Baler will be horizontal on a pallet due to the height. Hydraulic reservoir will be emptied.Door safety switch does not work.All ot...

PARTE: 12734 - POLIPASTO - 2 TONSCapacity (tons): 2Capacity (lb): 4000Lift Travel (feet): 20'Lift Speed (feet per minute): 26Volts: 230/460Phase: 3 PhaseMotor Horse Power: 4Hoist Duty Class: H4Lifting Medium: Link ChainMinimum Distance Between Hooks (inches): 38"Pendant/Control Length From Bottom of Hoist (ft): 17'Length of Hoist power supply cord (ft): 2'Industrial electric chain hoistEquipped with chain container and pendant controlLoad Tested and works as it should.

PARTE: 12733 - POLIPASTO - 2 TONSCapacity (tons): 2Capacity (lb): 4000Lift Travel (feet): 20'Lift Speed (feet per minute): 26FPMVolts: 230/460VPhase: 3PhHoist Duty Class: H4Lifting Medium: ChainMinimum Distance Between Hooks (inches): 32"Length of Hoist power supply cord (ft): 3'Hoist Comes With Chain ContainerThis is a used hoist in good condition, it has been load tested and works like it shouldIn good condition, new pendant and chain bag

PARTE: 4ST-BLOX - CENTRO DE TRABAJO PARA CASAS DE BLOQUESProduct DescriptionWorking centre for Block-House type log houses and wood cabins.Maximum workpiece dimensions 230 mm (width) x 230 mm (height)Minimum workpiece dimensions 100 mm (width) x 60 mm (height)Beam movement accomplished manually, with adjustable mechanical stops.4 The working centre is equipped with the following standard units:Horizontal and vertical notching unit (standard)Cross-cutting unit with a blade diam. of 600 mm (option...

PARTE: 4ST-BIGBLOX - CENTRO DE TRABAJO PARA CASAS DE BLOQUESProduct DescriptionWorking centre for Block-House type log houses and wood cabins.Maximum workpiece dimensions 270 mm (width) x 320 mm (height)Minimum workpiece dimensions 140 mm (width) x 120 mm (height)Beam movement accomplished manually, with adjustable mechanical stops.4 The working centre is equipped with the following standard units:Horizontal and vertical notching unit (standard)Cross-cutting unit with a blade diam. of 800 mm (op...

PARTE: 4ST-AUTOBLOX - BECKHOFF - CENTRO DE TRABAJO PARA CASAS DE BLOQUESProduct DescriptionAutomatic working centre for Block-House type log houses and wood cabins.Maximum workpiece section 200 mm (width) x 230 mm (height)Minimum workpiece section 65 mm (width) x 80 mm (height)Automatic and precise gripper positioning by rack and pinion system powered by brushless motorEquipped with a Beckhoff Panel PC with 12-inch displayDirect import of .BTL files in version 10.6The working centre is equipped ...

PARTE: 4ST-TOPMASTER BECKHOFF - CENTRO DE TRABAJO PARA CASAS DE BLOQUESProduct DescriptionAutomatic working centre for Block-House type log houses and wood cabins.Maximum workpiece section 270 mm (width) x 320 mm (height)Minimum workpiece section 120 mm (width) x 140 mm (height)Automatic and precise gripper positioning by rack and pinion system powered by brushless motorEquipped with a Beckhoff Panel PC with 12-inch displayDirect import of .BTL files in version 10.6The working centre is equipped...

PARTE: 4ST-STP/ORM - PRENSA PARA PUERTAS Y TABLEROSPNEUMATIC PRESS FOR DOORS AND WINDOWSCLASSICS FOR GLUINGIs a pneumatic press for gluing door and window frames.Its solid frame on wheels, two of which are steerable, allows for front loading, reducing and optimising space in the workshop.The working unit consists of vertical and horizontal pneumatic cylinders, which are practical and functional and can be positionedaccording to the size of the frame to be glued. Sliding vertical uprights.Technic...

PARTE: 4ST-STH/ORM - PRENSA PARA PUERTAS Y TABLEROSHYDRAULIC PRESS FOR DOORS AND WINDOWSCLASSICS FOR GLUINGIs a hydraulic press for gluing door and window frames.Its solid frame on wheels, two of which are steerable, allows front loading, reducing and optimising space in the workshop.The working unit consists of manually operated vertical and horizontal hydraulic cylinders, which are practical and functionaland can be positioned according to the size of the frame to be glued.Technical specificat...

PARTE: 4ST-STH/OR-A  - PRENSA PARA PUERTAS Y TABLEROSHYDRAULIC PRESS FOR DOORS AND WINDOWSCLASSICS FOR GLUINGIs an electro-hydraulic press for gluing door and window frames.Its solid vertical structure allows front loading, reducing and optimising space in the workshop.The working unit consists of vertical and horizontal hydraulic cylinders, which are practical and functional for adjustment and positioningaccording to the size of the frame to be glued.Practical release and positioning system fo...

PARTE: 4ST-SPECIAL - PRENSA PARA PUERTAS Y TABLEROSHYDRAULIC PRESS FOR DOORS AND WINDOWSCLASSICS FOR GLUINGIs an electro-hydraulic press for gluing door and window frames.Its solid vertical structure allows front loading, reducing and optimising space in the workshop.The working unit consists of vertical and horizontal hydraulic cylinders, which are practical and functional for adjustment and positioningaccording to the size of the frame to be glued.Practical release and positioning system for t...

PARTE: 4ST-STC - PRENSA HIDRAULICA UNIVERSALUNIVERSAL PNEUMATIC PRESSCLASSICS FOR GLUINGIs a pneumatic press for gluing blockboard, frames, cabinet doors, drawers and doors.The possibility of using two assembly stations, with two-hand control, and up to two working sidesmake it the universal solution for small and medium-sized production facilities.The working unit consists of practical and functional adjustable pneumatic cylinders.Cast iron squares for precise reference of the working area.Tech...

PARTE: 4ST-STC/B - PRENSA HIDRAULICA UNIVERSALUNIVERSAL PNEUMATIC PRESSCLASSICS FOR GLUINGIs a pneumatic press for gluing blockboard, frames, cabinet doors, drawers and doors.The vertical version allows you to reduce and optimise space in the workshop.The possibility of using two assembly stations, controlled by a two-hand control, makes itthe universal solution for small and medium-sized production facilities.The work unit consists of practical and functional adjustable pneumatic cylinders.Cast...