PARTE: 2EX- XS-3P52 - LIJADORA DE BANDA ANCHA – 3 BANDAS – 52” ANCHONueva con garantía 75″ Belt Length Over thickness safety device Infeed bed rollers Digital thickness controller Individual amp meters Disc brakes on sanding heads Telemecaique electrics Camozzi pneumatics Variable speed drive system   Specifications: Horsepower: 30/30/25 HP Voltage: 230V or 460V Optional Phase(s): 3PH Belt Size: 52" x 75" CFM Requirement: 6500 Ma...

PARTE: 12689 - LIJADORA - CALIBRADORA - BANDA ANCHA – 3 LIJAS - 50” ANCHO BOERE Usada - Buenas condiciones Mfg. 2002 50” width Drum/Drum/Platen heads 480 volt 3-phase

PARTE: 12688 - LIJADORA - CALIBRADORA - BANDA ANCHA – 3 LIJAS - 53” ANCHO CEMCO Usada - Buenas condiciones   Width capacity 53”. Drum, Drum, Combination Head (see sander specs) Head 1: Rubber covered contact roll, 10” dia, 65 shore adjustable with dial Head 2: Rubber covered contact roll, 10” dia, 65 shore adjustable w/dial Head 3: Combination head, (2) 5-1/2” finishing drums w/platen 440 V, 60 cy, 3 Phase Year 2000 Machine weighs app 6000 lbs ...

PARTE: 12686 - LIJADORA - CALIBRADORA - BANDA ANCHA – 3 LIJAS - 52” ANCHO VIET CHALLENGE 3333 Usada - Buenas condiciones Standard Specifications MFG. 2000 440/60/3 electrics

PARTE: 12684 - LIJADORA - CALIBRADORA - BANDA ANCHA – 2 LIJAS - 1 CEPILLO - 53” ANCHO SCMI Usada - Buenas condiciones   1st Head Planer 2nd Head Drum 3rd Head Combi Head Mfg. 2012

PARTE: 12683 - LIJADORA - CALIBRADORA - BANDA ANCHA – 3 LIJAS - 53” ANCHO BUTFERING Usada en buenas condicionesWidth capacity 1,350mm (53")Work Piece Thickness: 3mm to 160mm (1/8" to 6")Abrasive Belt Size: 1,370mm (53") x 2,620mm (103")Variable Feed Vacuum Feed Belt: 2.5 to 13 m/min (8 to 42 ft/min)Vacuum Motor: 7.5 HP1st Head: Steel Profiled Contact Roller, 30 HP2nd Head: Rubber Profiled Contact Roller, 20 HP3rd Head: Combination Head, Contact Roller & Air Cushion Sanding Pad/Platen,...

PARTE: 2EX- XS-1E37 - LIJADORA DE BANDA ANCHA – 37” ANCHO – 1 BANDANueva con garantía 60″ belt lengthMono-block construction increases durabilityDual display digital thickness controllerOmron electronic eye sanding belt trackingWye-delta soft startRegal variable speed drive unitQuality pneumatic controls by CamozziAutomatic conveyor belt trackingAuto thickness device for easy set up  Horsepower: 20HPVoltage: 230V or 460VPhase(s): 3PHBelt Size: 37" x 60"CFM Requirement: 1800M...

PARTE: 12669 - LIJADORA - CALIBRADORA - BANDA ANCHA – 1 LIJA - 36” ANCHO - TRANSPOWER USADA – MUY BUENAS CONDICIONES   15hp Motor 220v, 3ph Combination Head 36 x 60 Variable Speed   La máquina funciona correctamente, Lo único que no le funciona es el panel digital para la medida. Pero funciona manualmente. Esa esta lista para trabajar pero de todas maneras la probamos antes de enviar.

PARTE: 2NT-8-1100RC – LIJADORA DE BANDA ANCHA – 43” ANCHO – 2 BANDAS NUEVA CON GARANTIA • Max Working Width: 1100mm / 43" • Configuration: Roller-Combination Head • Number of heads: 2 * 1st Head 8" 65 Shore Rubber Contact Drum * 2nd Combination Head with 4" rubber contact drum with 65/70 Shore Platen • Motor: 30HP • Size of Sanding Belt: 43-3/4" x 75" • Mechanical Variable Speed 16 - 47.2fpm • Max Working Height: 150mm / 5.9" • Feed Moto...

PARTE: 3UD-UMD8130 – LIJADORA CALIBRADORA DOBLE LADO – 1300 MM (51”) - ANCHOCOMPACTA - SUPER HEAVY DUTY MACHINENUEVA CON GARANTIAA. The machine is mainly a variety of plates were thick sanding.B. Mineral cast body with the overall structure, having sufficient rigiditybalance, greatly improving the stability of the machine work.C. Sanding large roll diameter, increasing the service life of the belt, andthe dynamic balance precisely, smooth operation.D. Feeding frequency control, speed range...

PARTE: 3UD-SUR1300V – LIJADORA CALIBRADORA SUPERIOR E INFERIOR – 1300 MM (51”) - ANCHO NUEVA CON GARANTIA Rack sheet metal part 1) The lower body is made of heavy-duty base, which is welded around the whole with a whole plate, and the bottom is welded with dense channel steel and steel plate connection, which enhances the stability and strength of the lower body and ensures that the base is not deformed; 2) The conveying bed is welded with 18mm thick steel plate...

PARTE # 2TA-WS-DA5275 - LIJADORA - CALIBRADORA - 52" ANCHOCabezales: 2 cabezasCapacidad: 52" ancho x 75" largoWith the two head wide belt sander, you can accurate heavy sanding your stock with the first drum head and with the second combinational head you can give the unlimited fine finish.Rugged heavy-duty sheet metal construction designed for durability usage.Full power industrial motors drive sanding and auto infeed smoothly.Infeed and outfeed are spring loaded hold down rollers to ensure pos...

PARTE # 2TA-WS-DA4375 - LIJADORA - CALIBRADORA 43" ANCHOCabezales: 2 cabezasCapacidad: 43" ancho x 75" largoWith the two head wide belt sander, you can accurate heavy sanding your stock with the first drum head and with the second combinational head you can give the unlimited fine finish.Rugged heavy-duty sheet metal construction designed for durability usage.Full power industrial motors drive sanding and auto infeed smoothly.Infeed and outfeed are spring loaded hold down rollers to ensure posi...

PARTE # 2TA-WS-DA3760 - LIJADORA - CALIBRADORA - 37" ANCHOCabezales: 2 cabezasCapacidad: 37" ancho x 60" largoWith the two head wide belt sander, you can accurate heavy sanding your stock with the first drum head and with the second combinational head you can give the unlimited fine finish.Rugged heavy-duty sheet metal construction designed for durability usage.Full power industrial motors drive sanding and auto infeed smoothly.Infeed and outfeed are spring loaded hold down rollers to ensure pos...

ARTE # 2SS-4375-10 - LIJADORA - 42" ANCHO - 1 LIJA - 10 HP 1 FASEPARTE # 2SS-4375-20 - LIJADORA - 42" ANCHO - 1 LIJA - 20 HP 3 FASESPARTE # 2SS-4375-30 - LIJADORA - 42" ANCHO - 1 LIJA - 30 HP 3 FASESLijadora - CalibradoraCabezales: 1 cabezaCapacidad: 42" ancho Standard EquipmentPhoto electric belt tracking.Pneumatic belt tensioning.2 ½” graphite covered felt pad and adjustable platen.2 rubber-covered pinch rollers 2 ½” OD.2 machined idler rollers 4 ¼” OD with 1″ bearings.Rubber-cover...

PARTE # 2SS-3760-10 - LIJADORA - 36" ANCHO - 1 LIJA - 10 HP 1 FASEPARTE # 2SS-3760-15 - LIJADORA - 36" ANCHO - 1 LIJA - 15 HP 3 FASESLijadora - CalibradoraCabezales: 1 cabezasCapacidad: 36" ancho Standard EquipmentPhoto electric belt tracking.2 1/2″ removable platen.2 height adjustment indicators.5 emergency stops.2 rubber-covered pinch rollers 1 1/2″ OD.Rubber-covered contact roller 4 1/4″ OD with 13/8″ drive bearing.2 machined idler rollers 2 3/16″ OD with 3/4″ bearings.Conveyor t...

PARTE: 2TA-WS-A5275 - LIJADORA - CALIBRADORA - 52" ANCHO - 1 LIJACabezales: 1 cabezasCapacidad: 52" ancho x 75" largoRugged heavy-duty sheet metal construction design for durability usage.Full power industrial motors drive sanding and auto infeed smoothly.Infeed and outfeed are spring loaded hold down rollers to ensure positive feeding without sanding mark.Combination platen & drum sanding head for best sanding choice such as:1. With the platen up, the sander functions as a drum only machine, fo...

PARTE # 2TA-WS- A4375 - LIJADORA - CALIBRADORA - 43" ANCHOCabezales: 1 cabezasCapacidad: 43" ancho x 75" largoRugged heavy-duty sheet metal construction design for durability usage.Full power industrial motors drive sanding and auto infeed smoothly.Infeed and outfeed are spring loaded hold down rollers to ensure positive feeding without sanding mark.Combination platen & drum sanding head for best sanding choice such as1. With the platen up, the sander functions as a drum only machine, for sandin...

PARTE # 2TA-WS-A3775 - LIJADORA - CALIBRADORA - 37" ANCHOCabezales: 1 cabezasCapacidad: 37" ancho x 75" largoRugged heavy-duty sheet metal construction design for durability usage.Full power industrial motors drive sanding and auto infeed smoothly.Infeed and outfeed are spring loaded hold down rollers to ensure positive feeding without sanding mark.Combination platen & drum sanding head for best sanding choice such as1. With the platen up, the sander functions as a drum only machine, for sanding...