PARTE: 2EX- RO-11.1 - RUEDAS DE REPUESTO - ALIMENTADORRubber Resaw Roller (4-3/4″ x 1″)

PARTE: 2EX-RO-12 - RUEDAS DE REPUESTO - ALIMENTADORDetails:Complete Roller (4-3/4″ x 2-5/16″)This listing is for a set of one (1) new rubber power feeder roller with the following dimensions:Diameter: 120mm (4-3/4 inches)Width: 60mm (2-5/16 inches)This replacement wheel is designed for most 1 horsepower feeders equipped with split rims. It includes both the tire and wheel molded into one unit for convenience and durability.

PARTE: 2EX-RO-12PM - RUEDAS DE REPUESTO - ALIMENTADORComplete Roller (4-3/4″ x 2-5/16″)

PARTE: 2EX-XF-3J - ALIMENTADOR - 3 RUEDAS - 1/4 HP3 Rollers, 4 SpeedsFWD & REVSingle Phase 110V Only1/4 HP MotorOptional quick hold mountSpecifications: Horsepower: 1/4Voltage: 110VPhase(s): SingleNumber of Rollers: 3Number of Speeds: 4Speeds: 20, 26, 33, 43Suspension: 1/2"Roller Size: 3-1/8" x 1-3/16"Weight: 75 lbs

PARTE: 2EX-XF-M3 - ALIMENTADOR - 3 RUEDAS - 1/8 HP3 RollersVariable Speed (6.5 – 56 fpm)Forward/ReverseUniversal Stand IncludedSpecifications: Number of Rollers: 3Min Speed (ft/min): 6.5Max Speed: 56

PARTE: 2EX-XF-DC4.1 - ALIMENTADOR - 4 RUEDAS - 0.7 HPFeatures a 4-roller system with variable speeds. Includes the 2/3HP DC brushless servo motor for higher torque and better variable speed control than a 1HP AC motor.4 RollersFWD & REV1PH or 3PH 230VDC Brushless Servo Motor120mm x 60mm RollersInfinitely variable feed speeds 7-72ft/minSpecifications: Horsepower: .7HPVoltage: 230VPhase(s): 1 or 3Number of Rollers: 4Number of Speeds: VariableSpeeds: 7-72Min Speed (ft/min): 7Max Speed: 72Suspensio...

PARTE: 2EX- XR-12LE - SIERRA RAJADORA - 1 DISCO - 12"Specifications:Horsepower: 7.5HP or 15HPVoltage: 230V or 460VPhase(s): 1PH or 3PHBlade Size: 12"Main Motor: 15 HPFeed Motor: 1-1/2 HPBlade Speed: 4500Feed Speed: 50 - 100Max Rip Capacity: 14-3/4"Working Height: 32"Table Size: 37" x 51-1/4"Hold Down Rollers: 6Chain Rail Length: 40"Chain Pad Width: 6"Guaranteed Glue Line Length: 8'Set of Anti-Kickback Fingers: 3Disc Brakes: YesOiler System: Auto w/ shutoffAMPS (230V/460V): 42A / 21AMax Thicknes...

PARTE: 2EX- XR-14BX - SIERRA RAJADORA - 1 DISCO - 14"Details:15 HP Main motorHuge 45″ x 61″ table available6 full hold down rollersVariable feed speeds from 50-120 ft/min8′ Guaranteed Glue LineDisc BrakesMicro adjust fence with handwheelTriple anti-kickback fingers18″ wide ripping capacityAutomatic Oiler with low-oil warningWye-Delta soft startHeat treated chain and raceAmp meterSquare D Electrical controlsSpecifications:Horsepower: 15HPVoltage: 230V or 460VPhase(s): 3PHBlade Size: 14"M...

PARTE: 2EX- XG-12 - SIERRA RAJADORA MULTIPLE - 12"Details: Solid cast iron constructionHuge ripping capacityMotorized pressure roller elevationRemovable sleeve arbor set upWye-delta soft startIndividually spring loaded hold down rollersReplaceable pressure plate for problematic wood and short stockEasy access swivel control panelHeat treated chain and raceAutomatic lubrication for chain and raceLow oil shut down keeps you from running without oilInfinitely variable feed speeds: 30-130ft/minSq...

PARTE: 2EX- XR-14BXL - SIERRA RAJADORA - 1 DISCO - 14" - CAPACIDAD EXTREMA Details: 15 HP Main motorHuge 47.5″ x 69″ table available8 full hold down rollersVariable feed speeds from 50-120 ft/min9′ Guaranteed Glue LineDisc BrakesMicro adjust fence with handwheelTriple anti-kickback fingers18″ wide ripping capacityAutomatic Oiler with low-oil warningWye-Delta soft startHeat treated chain and raceAmp meterSquare D Electrical controlsSpecifications:Horsepower: 15HPVoltage: 230V or 460VP...

PARTE: 2EX- XR-12N - SIERRA RAJADORA - 1 DISCO - 12"Details:The Timberjack series straight line rip saws lead the way in innovation and value for all size production woodworking companies. These saws are designed with the quality construction and the features that you expect from an Extrema Machine.15 HP Main motorHuge 44″ x 63″ table8 hold down rollersVariable feed speeds from 50-150 ft/min10′ Guaranteed Glue LineDisc BrakesMicro adjust fence with handwheelTriple anti-kickback fingers14¾...

PARTE: 2EX- XR-20 - SIERRA RAJADORA - 1 DISCO - 20"Has a 14″ – 20″ blade capacity, 20 HP main motor, optional digital readout, disc brakes, optional black max laser and a heat treated cast steel chain.Details: 14″ – 20″ Blade capacity20 HP main motorAutomatic forced lubrication for chain and raceVariable speed from 50 – 180 ft/minRack and pinion fence systemSquare D electric controlsCamozzi pneumatic controlsDisc BrakesTriple anti-kickback fingers5-1/8″ maximum thicknessWye-Delt...

PARTE: 2EX-SXP-425 - CEPILLO 4 CARAS - 25" ANCHODetails: 50 HP Top, 40HP Bottom15 HP side Motor6000 RPM Cutter headsAir Loaded Sectional feed rollerDigital PLC Thickness ControllerLong infeed and outfeed tablesMoulder Style Side headsCarden Shaft drive SystemSegmented Roller Feed SystemSpecifications: Horsepower: 50/40/15/15HPWidth: 25"Top Motor: 50 HPBottom Motor: 40 HPLeft Motor: 15 HPRight Motor: 15 HPElevation Motor: 2 HPFeed Motor: 5 HPStandard Max Thickness 8"Max Available Thickness: 12...

PARTE: 2EX-XP-615 - CEPILLO 1 CARA - 24" ANCHODetails: 15HPSolid cast-iron constructionSolid infeed rollersHuge 8-3/4” thickness capacity6000 RPM cutterheadsInfinitely variable speeds 20-42 ft/minMotorized table elevationPLC thickness controller on XP-615Available with straight,STEALTH, or VECTOR cutterheadsHeavy duty screwjack elevation systemEasy access internal workingsExternal bed roller adjustmentsSpecifications:Horsepower: 15 HPVoltage: 230V / 460VPhase(s): 3 PHWidth: 24"Main Horsepowe...

PARTE: 2EX-MXP-225HD - CEPILLO 2 CARAS - 25" ANCHODetails:Has a feed speed of 20-110 ft/min., jointer style infeed, patented top and bottom Super Slide-out cutterheads, pneumatically loaded hold down rolls, a hard chrome plated bed, optinal long infeed table, disc brakes, massive four post elevation system and is available with Vector, Stealth, Mach or Straight Knife Cutter Heads.Patented top and bottom Super Slide slide out cutterheadsCarpet feed system along with jointers style infeed removes...

PARTE: 2EX-XP-216T - CEPILLO 2 CARAS - 16" ANCHODetails: Jointer style infeed for excellent de-cupping capabilityFeed speeds from 20-65 ft/minEasy access slide out cutter headDigital PLC thickness controller6000 RPM cutter headsSwivel control panelCarpet feed pressure adjustmentWye-delta soft startHard chrome plated bedAmp load metersAvailable with the VECTOR, STEALTH, MACH,or straight cuttersAutomatic lubrication w/ low oil shutdownSectional chipbreakerSpecifications: Horsepower: 20 / 10 HPV...

PARTE: 2EX-XP-225HD - CEPILLO 2 CARAS - 25" ANCHODetails: Jointer style carpet feed systemSlide out bottom cutter head for easy accessFeed speeds from 20 – 75 ft/minDigital PLC thickness controller with automatic6000 RPM cutter headsSquare D electrical controls, Wye-Delta soft startCarpet feed pressure adjustmentLong lasting thick chrome plated bedAutomatic thickness deviceThe only planer on the market with disc brakes std.Available with VECTOR, MACH, STEALTH, or straight knife cutter headsCe...

PARTE: 2EX-XP-610 - CEPILLO 1 CARA - 24" ANCHODetails:10HPSolid cast-iron constructionSolid infeed rollersHuge 8-3/4” thickness capacity6000 RPM cutterheadsInfinitely variable speeds 20-42 ft/minMotorized table elevationSlide scale digital readout on XP-610Available with straight,STEALTH, or VECTOR cutterheadsHeavy duty screwjack elevation systemEasy access internal workingsExternal bed roller adjustmentsSpecifications: Horsepower: 10 HPVoltage: 230V / 460VPhase(s): 3 PHWidth: 24"Main Horsepo...

PARTE: 2EX-XP-126T - CEPILLO 1 CARA - 26" ANCHOComes in 24″, 26″, 30″ & 40″ width. Is available with VECTOR Cutterhead, infeed roller, heavy duty internal drive system, and a PLC controller.Available with VECTOR, STEALTH, MACH or straight knife cutter heads 11-3/4” thickness capacityHigh Horsepowers: 20 HP & 15 HP6000 RPM cutterheadPowered top and bottom bed rollersMotorized table elevationDigital thickness controllerSolid cast-iron constructionTriple v-beltsSectional chipbreakers Ex...

PARTE: 2EX-SXP-225 - CEPILLO 2 CARAS - 25" ANCHODetails: Has a feed speed of 20-130 ft/min., a shaftdrive system, segmented feed rollers, 12 sets of feed rollers, jointer style infeed, patented top and bottom Super Slide out cutterheads, pneumatically loaded hold down rolls, a hard chrome plated bed, optinal long infeed table, disc brakes, massive four post elevation system and is available with Vector, Stealth, Mach or Straight Knife cutterheads.Patented top and bottom Super Slide slide out c...