AMXmachinery
PARTE: 12652 - CEPILLO - 2 CARAS - 18” ANCHO X 6” ESPESOR - NEWMAN
PARTE:
12652 - CEPILLO - 2 CARAS - 18” ANCHO X
6” ESPESOR - NEWMAN
Usado – Buenas condiciones
18" wide x 6" thick capacity
6 row helical heads
25 HP bottom; 40 HP top
Hydraulic feed
Carbide sharpener
Rubber tire top feed rolls
Control consoles
15 HP hydraulic pump unit.
16' x 18" belt conveyor to planer
AMXmachinery
PARTE: 12651 - CEPILLO - 4 CARAS - 18” ANCHO - PINHEIRO
PARTE:
12651 - CEPILLO - 4 CARAS - 18” ANCHO -
PINHEIRO
Usado – Muy buenas condicionesCapacity: 6" x 18"Bottom Head Motor: 12 HPTop Head Motor: 18 HPSide-Head Motor: 9 HP EachFeed Motor: 3 HPFeed Rate: 30 & 60 FPMSide Head Spindle Diameters: 40mm
*Specifications are from manufacturer literature and need to be
confirmed*
AMXmachinery
PARTE: 12650 - CEPILLO - 4 CARAS - 24” ANCHO - PINHEIRO
PARTE:
12650 - CEPILLO - 4 CARAS - 24” ANCHO -
PINHEIRO
Usado – Muy buenas condiciones
24" max. planing width
20" max. moulding width
3" min. moulding width
8" max. thickness capacity
16" min. length workpiece unbutted, 9" butt fed
7.5 HP top head
5.5 HP bottom head
side heads are 17.5 HP each
4 HP variable speed feed 20 to 100 FPM
Top and bottom heads are 4-knife straight knife cutter heads
Side heads are 5" dia. X 8" long 4-knife corrugated bac...
AMXmachinery
PARTE: 12623 - CEPILLO 4 CARAS - 16” x 6” - NEWMAN WHITNEY – M-68 DMD
PARTE: 12623 - CEPILLO 4 CARAS - 16” x 6” - NEWMAN WHITNEY – M-68 DMDUsado – Buenas condicionesMotores directos4 caras con top and bottom profilersLas 2 perfiladoras que tiene al final, pueden usarse para un perfil o para partir como sierra multiplePerfecta para cepillar volumen, vigas de madera, machimbreActualmente en operación, el dueño se está retirando
AMXmachinery
PARTE: 12482 - CEPILLO 1 CARA - CAPACIDAD 14” ANCHO - 5 HP, 3 FASES, 220V - MARCA JURADO
PARTE:
12482 - CEPILLO 1 CARA - CAPACIDAD 14” ANCHO - 5 HP, 3 FASES, 220V - MARCA JURADO
USADO - BUENAS CONDICIONES
AMXmachinery
PARTE: 12478 - CEPILLO 1 CARA - 20” ANCHO - 5.5 HP - 220V, 3 FASES - JET
PARTE:
12478 - CEPILLO 1 CARA - 20” ANCHO - 5.5 HP - 220V, 3 FASES - JET
USADO - BUENAS CONDICIONES
AMXmachinery
PARTE: 12447 - CEPILLO 2 LADOS - 15” ANCHO - 3 HP Y 5 HP
PARTE: 12447 - CEPILLO 2 LADOS - 15” ANCHO - 3 HP Y 5
HP
USADO
- BUENAS CONDICIONES
6
pulgadas altura
Motor
3 y 5 HP
Marca
Jurado
AMXmachinery
PARTE: 12439 - CEPILLO 2 CARAS - ANCHO 25” - CANTEK
PARTE:
12439 - CEPILLO 2 CARAS - ANCHO 25” - CANTEK
USADO - EN BUENAS
CONDICIONESManufactured in 2015• 50.5 Total HP• Spring loaded conveyor pin system• Spiral insert knife cutterheads withtwo sided solid carbide knives• Digital electronic thicknessadjustment• 25” Wide x 8” thick capacity• Inverter variable feed speeds• Sectional chip breaker and feed rollerbefore top head• Removeable bottom head for knife change• Chain feed drive• Auto conveyor lubrication• New ...
AMXmachinery
CEPILLO DE 3 HP, CON CUCHILLAS DE 40 CMS
PARTE: 12405-2 - CEPILLO DE 3 HP,
CON CUCHILLAS DE 40 CMS
USADA - BUENAS CONDICIONES
220V, 3 FASES
AMXmachinery
CEPILLO 2 CARAS - ANCHO 24” - CANTEK
PARTE:
12408 - CEPILLO 2 CARAS - ANCHO 24” - CANTEK
USADO - EN BUENAS
CONDICIONES
Top cutterhead motor 30 HP 460 volts Helical cutterhead
Bottom cutterhead motor 25 HP 460 volts straight knife
cutterhead
Feed motor 5 HP on spike carpet feed system 25 to 95 fpm
Digital control panel
Capacity 3/8” to 6-1/2” thickness
Max lumber width 24”
Min lumber length 15”
AMXmachinery
CEPILLO 2 CARAS - CAPACIDAD 30” - WHITNEY
PARTE:
12378 - CEPILLO 2 CARAS - CAPACIDAD 30” - WHITNEY
USADOMotores 15 y 10 HP
AMXmachinery
CEPILLO 2 CARAS - CAPACIDAD 15” - NORTHTECH
PARTE:
- CEPILLO 2 CARAS - CAPACIDAD 15” - NORTHTECH
USADO - BUENAS
CONDICIONES
Mfg: 2006
15" width capacity
6" height capacity
Helical heads
Top head 20HP
Bottom head 15HP
20-90 FPM
Motorized opening (1 HP)
460 volt 3 phase
AMXmachinery
CEPILLO NEWMAN 500 - 4 CARAS
PARTE:
11763 - CEPILLO NEWMAN 500 - 4 CARAS
11 - CEPILLO NEWMAN
500 - 4 CARAS
AMXmachinery
CEPILLO 1 CARA - ANCHO 20” - SCMI S520
PARTE:
12370 - CEPILLO 1 CARA - ANCHO 20” - SCMI S520
USADO - MUY BUENAS CONDICIONESANCHO 20”
Tersa style indexable replacement
cutter knives
AMXmachinery
CEPILLO 1 CARA - POWERMATIC - ANCHO 16”
PARTE:
12364 - CEPILLO 1 CARA - POWERMATIC - ANCHO 16”
USADO - BUENAS CONDICIONESMain motor 5 HP 220/440VCapacity 6” x 16”Cutterhead straight 4 knife
Painted and shop test runMotor is heavy frame
equivalent to at least a current 7.5 HP motor
AMXmachinery
CEPILLO 1 CARA - CAPACIDAD 20”
PARTE:
12337 - CEPILLO 1 CARA - CAPACIDAD 20”
USADO - BUENAS CONDICIONES
8.4 HP w/ Tersa style cutter-head, variable speed
sectional infeed, approx. 10″ of thickness capacity, motorized bed height
adjustable with digital readout, sectional chipbreaker, 6″dust collection port,
w/ ProScale readout.
AMXmachinery
CEPILLO 1 CARA - CAPACIDAD 18”
PARTE:
12336 - CEPILLO 1 CARA - CAPACIDAD 18”
USADO - BUENAS CONDICIONES
7 1/2-HP 230 Volt 3-Phase
3 Knife Straight Cutter Head
All 5 belts have been changed
Machine has been cleaned,
sanded, primered & painted
AMXmachinery
CEPILLO 2 CARAS - CAPACIDAD 30”
PARTE:
12335 - CEPILLO 2 CARAS - CAPACIDAD 30”
USADO - BUENAS CONDICIONES460/60/3, 135 amps electrics
Standard Specifications:
- 32-3/8" wide
x (3/8” to 6") thickness work-piece capacity
- 13” minimum
length x 2” minimum width work-piece
- 50 HP, 230/460/3
top head motor
- 50 HP, 230/460/3
bottom head motor
- 6” diameter,
5,000 RPM solid steel cutterheads
- Helical
cutterheads with insert style knives
- 10 HP 15 HP
inverter-controlled feed motor, (30 to 80 ft/min...
AMXmachinery
CEPILLO 2 CARAS - CAPACIDAD 24”
PARTE:
12334 - CEPILLO 2 CARAS - CAPACIDAD 24”
USADO - BUENAS CONDICIONES
Standard Specifications:
- 24" x 6" work
piece capacity
- 12" min. length,
(6" min. butted) x 1/4" min. thickness
- 30 HP upper cutter head
motor, 20 HP lower head motor
- Whisper helical carbide
cutterhead, (1/2" max. depth of cut)
- 1 HP platen/thickness
elevator motor
- 5 HP variable speed feed
motor, (25 to 100 ft/min. feed speed)
- 2" concentric
chipbreakers with pressure rollers
...
AMXmachinery
CEPILLO 1 CARA - CAPACIDAD 24”
PARTE:
12333 - CEPILLO 1 CARA - CAPACIDAD 24”
USADO - BUENAS CONDICIONES
NAVAJAS RECTAS
3 FASES